- Save Thousands vs. Concrete Replacement
- Stop Water Pooling & Drainage Issues
- Long-Lasting Concrete Stabilization
- Local, Hands-On Concrete Experts
- 7-Year Warranty on Qualifying Jobs
- Save Thousands vs. Concrete Replacement
- Stop Water Pooling & Drainage Issues
- Long-Lasting Concrete Stabilization
- Local, Hands-On Concrete Experts
- 7-Year Warranty on Qualifying Jobs
Dirty, Stained Concrete? Clean It Before It Gets Worse
If your concrete is covered in dirt, algae, oil stains, or buildup, it’s more than just a bad look.
It can become slippery.
It can break down the surface over time.
And it can make your home or business look neglected.
Most people wait until the stains are too deep or the surface starts wearing out.
The good news? A proper cleaning can restore the look and help protect your concrete.
Why Concrete Gets So Dirty Over Time
Concrete is porous, which means it absorbs water, dirt, and contaminants.
Over time, that leads to:
- Algae and mold growth
- Oil and grease stains
- Dirt and grime buildup
- Rust or mineral stains
- Surface discoloration
Weather, foot traffic, and vehicles only make it worse.
If it’s not cleaned properly, the surface can start to break down faster.
If your concrete is dirty in one area, other surfaces around your property are usually affected too. It’s common to see buildup on walkways and sidewalks, patios, or pool decks. In some cases, cleaning is the first step before sealing or repairs like concrete sealing or concrete repair. Taking care of these areas together helps improve both appearance and long-term durability.
Get a Fast Estimate
Dealing with sinking or uneven concrete? We make it simple to get answers.
Prefer to Send Photos?
Fill out the form to get started
Signs Your COncrete Needs Pressure Washing
If you’re on this page, your concrete likely has one or more of these issues:
- Dark stains or discoloration
- Green or black algae buildup
- Slippery areas when wet
- Oil or grease spots
- Dirt that won’t come off with normal cleaning
These are signs that basic cleaning isn’t enough and the surface needs professional pressure washing.
A Bigger Problem Than You Think
Dirty concrete and exterior surfaces aren’t just about appearance—they can lead to bigger issues over time.
Built-up dirt, algae, mold, and grime trap moisture against the surface, which can:
- Cause staining and surface damage
- Make walkways slippery and unsafe
- Break down concrete, siding, and other materials
- Lead to faster wear and costly repairs
What starts as a cosmetic issue can quickly turn into a safety concern and shorten the life of your surfaces.
Regular pressure washing removes that buildup, protects your property, and keeps everything clean, safe, and well-maintained.
Why Pressure Washing Is the Right Solution
Pressure washing isn’t just about making your concrete look clean—it’s about protecting the surface and preventing long-term damage.
By removing built-up dirt, algae, mold, and grime, you’re not only improving appearance—you’re helping your concrete last longer and perform better.
When the job is done right, you get:
- Immediate improvement in appearance
- Safer, less slippery walking surfaces
- Removal of mold, algae, and buildup that trap moisture
- Protection against surface wear and staining
- A clean surface ready for sealing or repairs
- Consistent, even results across the entire area
Regular pressure washing helps stop problems before they start—keeping your property looking better and reducing the need for more costly repairs later.
Why Choose Summit Pro
When you call Summit Pro, you’re working directly with Brian Mrksich—not a sales team. That means you get real answers, honest guidance, and a clear plan to fix your concrete the right way.
We don’t overcomplicate things. We focus on solving the problem under your concrete so it stays level and doesn’t keep getting worse.
What You Can Expect
- Clear answers about what’s going on
- Honest pricing with no surprises
- No pressure to upsell anything you don’t need
- Clean, controlled work with small drill holes
- Most jobs done in a few hours
- Minimal disruption to your home or business
- Concrete ready to use the same day
- 7-year warranty on qualifying jobs
From the first call to the final lift, everything is straightforward. We show up, explain the issue, and fix it the right way—without dragging the job out or creating a mess.
You get a level, stable surface and a solution you don’t have to think about again.
Concrete Pressure Washing FAQ
We clean a wide range of concrete surfaces, including driveways, sidewalks, patios, pool decks, and commercial areas. If you’re planning additional work, cleaning is often the first step before services like concrete sealing or masonry work.
No. We use the right pressure and equipment for each surface to clean effectively without causing damage.
Improper DIY pressure washing can cause surface wear, but professional cleaning avoids that.
Yes, in many cases we can significantly reduce or remove oil and grease stains. Some deep stains may not disappear completely, but they will be greatly improved.
Most residential pressure washing jobs are completed in a few hours, depending on the size of the area and level of buildup.
Your concrete is ready to use as soon as it dries, which usually happens quickly depending on weather conditions.
No. As long as we have access to the area, we can complete the work and follow up with you after.
Yes, sealing is often recommended after cleaning. It helps protect the surface and keeps it looking clean longer. Learn more about concrete sealing.
Most properties benefit from pressure washing once every 1–2 years, depending on traffic, weather, and buildup.
No. Pressure washing cleans the surface but doesn’t fix structural issues. If your concrete is uneven, you may need concrete leveling or void filling.
Yes. It improves appearance, increases safety, and helps extend the life of your concrete with minimal time and cost.
Concrete Lifting & Repair Across the Denver Area
Summit Pro Concrete Solutions proudly serves homeowners, businesses, and property managers across Denver and surrounding communities. Whether you’re dealing with a sinking driveway, uneven sidewalk, or large commercial slab, we’re ready to help.
We travel throughout the region to provide fast, reliable concrete lifting and repair services.
Cities We Serve
- Denver
- Colorado Springs
- Aurora
- Centennial
- Castle Rock
- Castle Pines
- Parker
- Highlands Ranch
- Littleton
- Lone Tree
- Greenwood Village
- Monument
- Elizabeth
- Franktown
And many surrounding areas within about a 75-mile radius. If you’re nearby but don’t see your city listed, just reach out.
Sinking concrete getting worse? Fix it before it spreads.
A small fix today prevents a bigger repair tomorrow
Hours:
Mon–Fri: 8:00 AM – 6:00 PM
Sat: 8:00 AM – 12:00 PM
Sun: Closed
Serving Denver and surrounding areas including Colorado Springs, Aurora, Centennial, Castle Rock, Parker, Highlands Ranch, Littleton, and more.
Summit Pro Concrete Solutions
We help homeowners and businesses fix sinking, uneven concrete without replacing it. Using polyurethane foam lifting, we raise and stabilize your concrete fast, clean, and with long-lasting results.
From driveways and sidewalks to warehouse floors and parking lots, we focus on one thing—fixing the problem the right way so it lasts.
© Summit Pro Concrete Solutions. All Rights Reserved | Privacy Policy | Developed By LevelRightMarketing
