- Save Thousands vs. Concrete Replacement
- Stop Water Pooling & Drainage Issues
- Long-Lasting Concrete Stabilization
- Local, Hands-On Concrete Experts
- 7-Year Warranty on Qualifying Jobs
- Save Thousands vs. Concrete Replacement
- Stop Water Pooling & Drainage Issues
- Long-Lasting Concrete Stabilization
- Local, Hands-On Concrete Experts
- 7-Year Warranty on Qualifying Jobs
Uneven Factory Floors Slow Down Work and Create Risk
If your factory floor is uneven, sinking, or cracking, it’s more than just a surface issue.
It affects equipment.
It impacts safety.
And it can interrupt daily operations.
Small issues on industrial floors don’t stay small. Over time, they get worse, spread, and become more expensive to fix.
The good news? You don’t have to shut down your facility or replace the floor to fix it.
Why Factory Floors Sink in the First Place
Concrete floors in factories take constant weight and pressure. Over time, the support underneath can weaken.
In most cases, the problem is below the slab:
- Soil wasn’t compacted properly during construction
- Heavy loads cause the base to shift over time
- Water intrusion weakens the soil underneath
- Voids form under the slab due to washout or settling
Once the support is compromised, the concrete begins to sink and become uneven.
Replacing the floor doesn’t fix these issues—it just covers them temporarily.
If your factory floor is sinking, other areas of your property may be affected as well. It’s common to see similar problems in warehouse floors, interior concrete floors, or even exterior areas like parking lots. In deeper cases, void filling or soil stabilization may be needed to properly support the slab and prevent further movement.
Get a Fast Estimate
Dealing with sinking or uneven concrete? We make it simple to get answers.
Prefer to Send Photos?
Fill out the form to get started
What You’re Probably Seeing Right Now
If your factory floor has issues, you may notice:
- Sections of the floor sinking or settling
- Uneven joints between slabs
- Cracks forming or spreading
- Equipment not sitting level
- Forklifts or carts feeling unstable
- Gaps forming along walls or expansion joints
These are all signs that the problem is underneath the concrete—not just on the surface.
Polyjacking: A Better Way to Fix Your Concrete
At Summit Pro Concrete Solutions, we lift and level your existing driveway using polyurethane foam. This concrete leveling process (also called polyjacking) works from below the surface to fix the real problem.
Step 1: Inspect & Drill
- Identify the problem areas underneath the slab
- Drill small, strategic holes to access below
Step 2: Lift & Stabilize
- Inject high-density poly foam under the concrete
- Lift the slab and fill empty space
- Stabilize the base to help prevent future sinking
Step 3: Patch & Finish
- Patch the small drill holes
- Clean the area
- Concrete is ready to use the same day in most cases
Concrete Lifting vs. Replacement
Most people assume replacing concrete is the only way to fix the problem—until they realize what that actually involves.
Here’s how the two options really compare:
Concrete Replacement
- Higher cost (often double or more)
- Takes days—or even weeks—to complete
- Loud, messy demolition and disruption
- New concrete can sink again if the soil isn’t fixed
Concrete Lifting (Polyjacking)
- Typically done in just a few hours
- Ready to use the same day
- Clean process with small drill holes
- Lifts your existing concrete and fixes the problem underneath
If your concrete is still in good condition, lifting is almost always the faster, cleaner, and more cost-effective way to fix it.
Uneven Floors Create Bigger Problems Over Time
An uneven factory floor doesn’t just affect appearance—it impacts how your space operates day to day.
Even small changes in elevation can disrupt workflows, create safety concerns, and put added strain on equipment and the slab itself.
Over time, it can:
- Increase safety risks for employees and forklift traffic
- Cause premature wear or damage to equipment and wheels
- Slow down movement of materials, pallets, and machinery
- Create uneven loads and added stress on the concrete
- Lead to more cracking and shifting across the floor
Many facility owners wait, thinking it’s manageable or part of normal wear. But once the slab starts to settle, the problem underneath continues to spread—and the impact on operations becomes more noticeable.
Fixing it early helps keep your facility running smoothly, prevents larger repairs, and avoids costly downtime later on.
What You Get When It’s Fixed the Right Way
Concrete lifting isn’t just about leveling your floor—it’s about restoring a safe, stable surface that keeps your operation running smoothly.
When the job is done right, you get:
- A level, even floor that supports equipment and traffic
- Safer conditions for employees and forklift movement
- Improved efficiency for moving materials and machinery
- Reduced wear and damage on equipment and wheels
- Stabilized soil that supports the slab long-term
- A clean repair without tearing out large sections
- Often half the cost of full concrete replacement
This isn’t a temporary patch—it’s a long-term fix that addresses the real cause of the problem and helps prevent future disruptions.
Why Choose Summit Pro
When you call Summit Pro, you’re working directly with Brian Mrksich—not a sales team. That means you get real answers, honest guidance, and a clear plan to fix your concrete the right way.
We don’t overcomplicate things. We focus on solving the problem under your concrete so it stays level and doesn’t keep getting worse.
What You Can Expect
- Clear answers about what’s going on
- Honest pricing with no surprises
- No pressure to upsell anything you don’t need
- Clean, controlled work with small drill holes
- Most jobs done in a few hours
- Minimal disruption to your home or business
- Concrete ready to use the same day
- 7-year warranty on qualifying jobs
From the first call to the final lift, everything is straightforward. We show up, explain the issue, and fix it the right way—without dragging the job out or creating a mess.
You get a level, stable surface and a solution you don’t have to think about again.
Factory Floor Leveling FAQ
Factory floors become uneven due to soil movement, heavy equipment loads, and voids forming under the slab. Over time, this leads to sections of the floor sinking or shifting.
In many cases, yes. Our process is fast and can often be scheduled in sections to minimize disruption to your operations.
Most jobs are completed in a few hours, depending on the size and condition of the floor.
In most cases, the floor is ready to use the same day, allowing you to get back to normal operations quickly.
Yes. The foam is designed to support heavy loads and is commonly used in industrial and commercial applications.
If deeper issues are present, we may recommend void filling or soil stabilization to fully support the slab.
Yes. Concrete lifting is typically much more affordable than full replacement and avoids extended downtime.
Our process stabilizes the base under the slab, which helps prevent future movement. We also offer a 7-year warranty on qualifying jobs.
Yes. We also work on warehouse floors, parking lots, and other commercial concrete areas.
In many cases, yes. You can send photos and details, and we can provide a quick estimate before scheduling a visit if needed.
7-Year Warranty. No Guesswork.
Concrete Lifting & Repair Across the Denver Area
Summit Pro Concrete Solutions proudly serves homeowners, businesses, and property managers across Denver and surrounding communities. Whether you’re dealing with a sinking driveway, uneven sidewalk, or large commercial slab, we’re ready to help.
We travel throughout the region to provide fast, reliable concrete lifting and repair services.
Cities We Serve
- Denver
- Colorado Springs
- Aurora
- Centennial
- Castle Rock
- Castle Pines
- Parker
- Highlands Ranch
- Littleton
- Lone Tree
- Greenwood Village
- Monument
- Elizabeth
- Franktown
And many surrounding areas within about a 75-mile radius. If you’re nearby but don’t see your city listed, just reach out.
Sinking concrete getting worse? Fix it before it spreads.
A small fix today prevents a bigger repair tomorrow
Hours:
Mon–Fri: 8:00 AM – 6:00 PM
Sat: 8:00 AM – 12:00 PM
Sun: Closed
Serving Denver and surrounding areas including Colorado Springs, Aurora, Centennial, Castle Rock, Parker, Highlands Ranch, Littleton, and more.
Summit Pro Concrete Solutions
We help homeowners and businesses fix sinking, uneven concrete without replacing it. Using polyurethane foam lifting, we raise and stabilize your concrete fast, clean, and with long-lasting results.
From driveways and sidewalks to warehouse floors and parking lots, we focus on one thing—fixing the problem the right way so it lasts.
© Summit Pro Concrete Solutions. All Rights Reserved | Privacy Policy | Developed By LevelRightMarketing
